The compact designed pressure calibration case LR-Cal LPK 300-PP can be used portable as well as stationary. The rugged case makes it suitable for harsh operating conditions also.

The LR-Cal LPK 300-PP, through its integrated electric pump, enables the provision of -0.85 to +20 bar (-12...+300 psi). Due to the integrated electric pump, the operator can supply the test item to be calibrated with pressure or vacuum on-site and does not need any separate pressure supply for pressure ranges up to 20 bar. The fine pressure adjustment is to be carried out via the manual sensitive volume fine adjustment valve. 

The LR-Cal LPK 300-PP is a very user-friendly, accurate and compact solution for pressure comparison calibrations. The separately to be ordered reference sensor LR-Cal LPC-S is changeable. Several pressure ranges can be covered with one instrument.

All standard pressure ranges between 0...250 mbar (0...4 psi) and 0...1000 (0...14,500 psi) are available. For operations with pressure ranges over 20 bar, a pressure test pump is required in addition.

The pressure calibration case LR-Cal LPK 300-PP measures pressure, volts and milliamps and supplies 24 VDC as source for transmitters as unit under test. Calibration procedures can be pre-defined and used for calibrations on site. The LR-Cal LPK 300-PP is featured with an USB interface and is powered by a chargeable Lithium-Ion battery pack.

 

Standard Scope of Delivery:

-Battery Charger, Electrical Connection cable for LPC-S sensor, Set of red/black test cables, factory calibration certificate for pressure, current, and voltage, and user manual.


This item comes with a one year warranty from the manufacturer. Please allow 4-6 weeks lead time for this new product to arrive. 

LR-Cal LPK 300-PP Pressure Calibration Case with Electric Pump

$5,839.00Price
LPC-S Sensor Ranges (bar)
    1. LPK 300 Software $399with USB cable 
    2. Dirt Trap $639 to be mounted on test port of device
    3. BSP Adapters $369 Stainless Steel for test pressure port 1/2" BSP F to 1/4" BCP F + 1/2" NPT F to 1/4" NPT F.