top of page
FLIR EV-KIT-1NACS EV Charger Test Kit with DM286
The Flir EV45-NACS is equipped with a built-in NACS plug for NACS charging stations or AC wall connectors and is compatible with SAE J1772 Type 1 stations. It is designed for level 1 or level 2 electric vehicle AC charging stations (EVSEs) at both residential and commercial destinations. Test charge current interrupt device (CCID) to ensure electrical safety and verify EV Charger maximum current output charging voltages and frequency for further performance and safety checks with the included Flir DM286 IGM multimeter for a comprehensive kit solution. The Bluetooth® Flir METERLiNK®technology in the DM286 allows you to connect wirelessly to the METERLiNK® app on mobile devices, enabling instantaneous documentation, reporting, and sharing of results.

FLIR EV-KIT-1 NACS EV Charger Test Kit with DM286

US$1,899.99Price
Quantity

  • Ordering Information

    This product is only available to customers in the USA.

    Please allow 2 - 3 weeks for this product to arrive. 

    This item comes with a 1 year warranty. 

     

  • Features

    • Ensures EV charging station safety by verifying Protective Earth (PE) and electrical wiring integrity
    • Tests residual current device (RCD)
    • Indicates the maximum current output of EV chargers
    • Designed for Type 2 and compatible with Type 1 connectors
    • Measures charging voltage and frequency when used with an optional FLIR digital multimeter
    • Complies with CAT II 300 V and IEC 61851-1 EV safety standards
    • Utilize the IGM Digital Multimeter to further troubleshoot and diagnose potential electrical issues
    • Designed for NACS and compatible with Type 1 with compact converter (Type 1 to NACS) included

  • Included

    • EV45-NACS
    • DM286 IGM Multimeter
    • Converter for Type 1
    • Carrying Pouch
    • Test Leads
    • USB Type A to Type C Cable
    • 4 x AA Batteries
    • TA04 Battery
    • User Manual

  • Specifications

    Electrical Measurement
    PE Pre-Test Pass / Fault (>50 V AC/DC between PE conductor and touch sensor)
    PP State Indication Open, 13 A, 20 A, 32 A, 63 A
    CP State Simulation A (Disconnected) , B (Connected) , C (Charging), D (Charging w/ ventilation), E (Error)
    Voltage Phase Indication L1, L2
    CP Error (E State) Simulation Pass / Fault (CP signal short-circuited to PE)
    PE Error Simulation Pass / Fault (Interruption of PE conductor)
    RCD/CCID Trip Test Pass / Fault (Test RCD/CCID activation once tripped)
    Outputs (For Test Purpose Only)
    Measuring Terminals L1, PE, N Maximum 250 V (Single Phase), 50/60 Hz, CAT II 300 V, Maximum 10 A
    Outputs (Optional Meters)
    Connect to CMM (DM286) CP State C / D for AC Voltage with Hz measurement
    Connect to Insulation Tester (IM75-2) CP State B for EV cable Insulation Test
    Power System
    Battery 4 × AA Alkaline batteries
    Battery Life Approximately 100 hours, with alkaline batteries
    General Information
    NACS Connector (Built-In) Connector for NACS Station
    Accessory Converter NACS to SAE J1772 Type 1
    Category Rating CAT II-300 V
    Warranty Limited 3-Year Warranty
    Certifications
    Certifications ETL, CE
    Safety Standards IEC 61010-1 CAT II-300 V
    EMC Standards EN61326-1
    Environmental Data
    Operating Ambient Temperatures and Relative Humidity −10°C to 30°C (14°F to 86°F), <85% RH
    30°C to 40°C (86°F to 104°F), <75% RH
    40°C to 50°C (104°F to 122°F), <45% RH
    Storage Temperature and RH −20°C to 60°C (−4°F to 140°F), 0 to 80% RH (without batteries)
    Operating Altitude 2000 m (6560')
    Pollution Degree 2
    Meter Physcial Data
    Dimensions 237 mm × 65 mm × 56 mm (9.33" × 2.56" × 2.20")
    Weight 600 g (1.32 lbs)

Related Products

bottom of page