Fluke 1750 3 Phase Power Quality Analyzer Power Logger Meter NIST Calibrated

The Fluke 1750 Three-Phase Power Quality Recorder automatically detects, scales, and powers current probes requiring only single-lead voltage connections enables safe and quick setups. Once power is applied, the Fluke 1750 automatically begins recording and LEDs give you assurance that the recorder is powered up and signals are within range – no more uncertainty that data is being recorded.
 

Take advantage of the Fluke 1750 three-phase power quality recorder's exclusive capture algorithm which makes certain all events are captured without the tedious setups and blind spots associated with threshold driven equipment. The PDA wirelessly interfaces with the recorder, allowing quick setup and verification with waveform displays, meter screens, and phasor diagrams. 

Designed for capturing every measurement and event, on every cycle, this three-phase power quality recorder can gather information for up to 30 days. Additionally, this instrument possesses outstanding accuracy and resolution, which provides complete visibility into your installation or distribution system.

Features

• Power quality that meets the standard, all measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, harmonics, flicker etc.
• Ethernet interface
•  
• Threshold-free setup, apply thresholds after data is collected with Fluke power analyze software so there is no need to worry about missed information due to incorrect set-up
• Cross-channel and current triggering capture every measurement, on every channel, every time
• Intuitive PC software allows users to easily analyze data and generate reports
• Automated EN50160 reporting and compliance 
• Plug and play which sets up in minutes with self-identifying current probes and single-lead voltage connections
• No need to reconnect wires, swap channels internally with a tablet "front panel" or PC when connections are not correct
• Measure every parameter such as voltage and current on three phases, neutral, and ground
• 5 MHz, 8000 Vpk waveform capture provides a detailed picture of even the shortest events
• Quickly retrieve data with included SD memory card or via the 100BaseT ethernet connection

Record every power quality parameter, every cycle, all the time

Setting up a power quality analyzer to capture detailed power quality data has never been easier than it is with this power quality recorder. The only things you need to know are the system voltage, frequency and the power configuration (delta or wye). The analyzer then captures the most important data for up to 30 days without losing the most important details. These power meters automatically record every power quality parameter and event, on every cycle – all the time. Once the data is captured download via Ethernet or directly to SD card (without the need of any other device). This instrument features a wireless front panel for viewing measurements, data and setting up, implemented via a tablet computer using Bluetooth communication.

Easy to use

The recorder automatically detects, scales, and powers current probes without needing batteries or external power supplies. Requiring only single-lead voltage connections enables safe and quick setups. Once power is applied the instrument automatically begins recording and LEDs give you assurance that the recorder is powered up and signals are within range - no more uncertainty that data is being recorded. This power quality recorder has an exclusive capture algorithm which makes certain all events are captured without the tedious setups and blind spots associated with threshold driven equipment.

Comprehensive power system data

Every cycle on every channel is simultaneously sampled providing complete analysis of power quality, harmonics, power and energy. Cross-channel current and voltage triggering captures event data on all input channels simultaneously, no matter which channel triggered the event. When periodic analysis of the waveform may be needed, the Snapshot mode captures waveforms at user-defined intervals. Even dc signals can be recorded!

Powerful data management

Data is automatically stored on the internal flash memory that can store records for over a month without compression or overwriting. Data is retrieved via one of two quick and easy options: download the data onto the included SD memory card without using your laptop, or transfer directly to your computer via Ethernet, using TCP/IP protocol.

Voice, data, and picture annotations can be made via the tablet to flag important points in the data stream. Imagine being able to flag in your recorded data when a transfer switch was operated, or load changes were made.

All the latest power quality standards are built-in

IEC 61000-4-30 compliant measurement systems provide the confidence that all parameters are measured and calculated consistently with international standards. Automated EN50160 compliance reporting for rapid Pass/Fail testing.

600 V CAT IV and 1000 V CAT III safety rating

Designed to help protect you and your equipment, the Fluke 1750 three-phase power recorder and accessories are all certified to meet the stringent safety standards for use in 600 V CAT IV and 1000 V CAT III environments. They are the first tools of their kind to carry the CAT IV rating and, therefore, can be used for most power connections and for all outlets in a low-voltage power distribution system.