World's smallest portable calibration baths can be transported with the fluid in them
Stable to ±0.03°C or better, depending on the fluid you use
Uniformity is ±0.02°C or better for low uncertainties using a reference thermometer
Display accuracy has been improved to ±0.25°C for quick calibrations without a reference thermometer
With a 48mm (1.9") diameter, 140mm (5.5") deep tank, user can calibrate any type of sensor including short, square, or odd-shaped sensors
Problems of fit and immersion are virtually eliminated by using a fluid medium rather than a dry-block calibrator
Micro-Baths are perfect for liquid-in-glass and bimetal thermometers
All models have RS-232 ports, come with Interface-it software, and can be used with MET/TEMP II software
Also included are contacts to calibrate a thermal switch, eight set-point memory storage, ramp-rate adjust, and over-temperature safety cutout
Cold Micro-Baths are CFC-free as well as compressor-free
Temperature Range
-5 to 125°C (23 to 257°F)
Stability
±0.015°C @ -5°C; ±0.03°C @ 1221°C (oil 5010)
Accuracy
±0.25°C
Uniformity
±0.02°C
Resolution
0.01°C/°F
Heating Time
25 to 100°C: 30 minutes
Cooling Time
25 to 0°C: 30 minutes
Fluid Volume
0.75L
Well Size
2.5" dia. x 5.5" deep (64 x 139 mm) Access opening is 1.9" (48 mm) dia.