The CMM-GL unit is designed to drain used oil from and pump new oil into wind turbine gearboxes. The unit can also flush the gearbox with special oil. The machine can service main and azimuth gearboxes, as well as blade angle of attack gearboxes.
The unit operates with mineral and synthetic gearbox oils with the following specifications:
- kinematic viscosity at 40°С – 8…50 mm2/sec;
- density at 20°С – 800…950 kg/m3;
- ISO 4406 purity class – -/19/16 or better.
CMM-GL gearbox oil changer design
The СММ-GL is a trailer with one axle, which supports the control section and the process section. The process section also includes hose reels. Control section doors are equipped with secure locks.
The unit requires an external power source. The CMM-GL is fully automated with a special controller, which manages operation of pumps, valves, capacitance sensors, temperature sensors, flow switches, filters, manometers and flow meters.
Modes of operation
Used oil drain mode
In this mode, the vacuum pump extracts oil from a gearbox into the vacuum chamber until the chamber is full. Then a gearpump transports the oil to a prepared container.
Gearbox flushing mode
In this mode, oil is supplied by the gearpump to the required elevation (up to 60 meters) and is injected into the gearbox under pressure, washing away the remaining old oil and particulate matter.
New oil supply mode
In this mode, the gearpump supplies oil to the required elevation (up to 60 meters).
Filtration mode
While pumping new or flushing oil into the gearbox, the oil passes through a 15 μm filter for enhanced purity.
GlobeCore CMM-GL Wind Turbine Gearbox Oil Changer
Contact us for a quote or more information about this GlobeCore product. Our sales engineers are waiting to assist you!
- info@stratatek.com
- 1 (888) 868 - 4546
- 1 (905) 406 - 0100