LP6016-01P is a low voltage DC voltage source 0 to +16.1 V (Dual Voltage Output / V1, V2) equipped with LAN/USB/RS-232 interface.
The output noise voltage is extremely small with a maximum of 10 μVrms, and the temperature stability of the output is excellent at less than ±10 ppm/°C.
It can be used as a DC bias source for photodiodes and a control voltage source for crystal oscillators.
Output Noise: 10 μVrms Bandwidth 10 Hz to 20 MHz
Output Voltage Stability: ±10 ppm/°C typical
Output voltage:
LP6016-01P: 0 to +16.1 V (Dual Voltage Output / V1, V2)
V1 and V2 settings can be selected from tracking mode or
independent mode.
Setting resolution: 500 μV*
Setting accuracy: ±(0.03% +250 μV)*Maximum current: 100 mA
Interface: USB, RS-232, LAN
*Modifications of setting resolution and accuracy are available upon request prior to placing your orders.
Details and pricing available upon request.
Modification example:
Setting Resolution: 100 µV
Setting Accuracy: ±(0.03% +75 µV)
NF Corp LP6016-01P Low Noise DC Voltage Source 0 to +16.1 V Dual Voltage Output
- Basic accuracy: ±0.08%
- Measurement frequency: 10 µHz to 36 MHz
- Measurement Impedance range: 10 µΩ to 100 GΩ (Mode: IMPD-EXT)
- Measurement signal amplitude: 0.01 mVrms to 3 Vrms0.1 µArms to 60 mArms
- DC bias: −5 V to +5 V/−40 V to +40 V (more than 1 kHz)100 mA to +100 mA
- Measurement time: 0.5 ms/point
- Measurement parameter Z, R, X, Y, G, B, Ls, Lp, Cs, Cp, Rs, Rp, θz, θy, D, Dε, Dµ, Q, V, I, εs, εs’, εs”, µs, µs’, µs”, FREQUENCY
High Speed Measurement: The fastest in the industry at 0.5 ms/point. Reduce takt time. In addition, by increasing the measurement time to be set, the measurement results are averaged and the influence of noise is reduced. The optimum measurement time can be selected as required.
Please allow 2 - 3 weeks lead time for this new product to arrive.
Comes with a 1 year warranty from the manufacturer.