The PIM-Mini-200 pulsed laser diode driver packs a lot in a small casing: 25 A to 200 A current output, rise and fall times below 8 µs, pulse widths of 25 to 250 µs, forward voltage from 0 V to 48 V, and pulse repetition rate from single shot to 20 Hz. Use the PIM-Mini to drive laser diodes, bars, arrays, or any low-impedance load.

The PIM-Mini’s output current can be set manually with a potentiometer or using an external analog voltage. The input trigger signal controls the pulse width. They can be powered by a single DC voltage anywhere from 12 V to 60 V, depending on the compliance voltage needed.

Advantages:

Multiple models for different pulsed current output
12V support voltage required, no AC input required
External power and trigger for flexibility
Compact and Lightweight

Berkeley BNC PIM-MINI-200 | 48V Compliance Voltage Pulsed Laser Diode Driver

Quantity

Ordering Information
Please allow 3 - 6 weeks for this product to arrive.

This product comes with a 1 year (12 Month) warranty.

Technical Specifications

Compliance Voltage	48V
Max Current Ampliude	200A
Rise/Fall Time	10μs
Max Frequency	20Hz
Pulse Engine (Trigger)	External
Remote Control	N/A
Form Factor	Module
Cooling	Ambient Air
Polarity	Positive
Pulse Width	25μs to 250μs

Please refer the images for more information

Features/Applications
FEATURES
- Pulsed current from 25A to 200A, dependent on model
- Forward voltage up to 48V
- Frequency range ≤ 20 Hz
- Pulse width minimum of 25 µs and a max pulse width of 250 µs
- External triggering from external devices
- Current set-point controlled internally with a potentiometer or externally with an analog voltage
- Current monitor using an SMP connection
- Compact and Lightweight, Size (HxWxD) 11.3 cm x 12.65 cm x 5.4 cm, Weight 0.5 kg
APPLICATIONS

The PIM-Mini Series is designed to drive laser diodes, bars, arrays, or any low-impedance load with a forward voltage drop up to 48 V.