GW Instek GDS-3502 is a 500MHz, 2-channel, Digital Storage Oscilloscope with USB and LAN.
The GDS-3000A series is the flagship product of GW Instek's new generation digital storage oscilloscopes. Its highest frequency bandwidth has been elevated to 650MHz, and a 350MHz model is also available. The memory depth of each channel is up to 200Mpts. The
sampling rate is 4GSa/s interleaved.
The display is 10.2" TFT LCD and the RGB display output is 8 bits each, allowing users to clearly analyze the strength distribution of the measured signal. The models include two-channel and an optional 16-channel logic analyzer.
For the analog channels, the memory depth of 200Mpts per channel is the best in the same category. The advantage of long memory depth is that when users set the oscilloscope in the slow time level, the oscilloscope can still maintain a higher sampling rate. When the sampling rate is two-fold higher than the test frequency, it can ensure there is no distortion of the captured signal, which is conducive to the observation of the changes of the signal for a long time in the slow level that is very helpful for the in-depth analysis of the signal.
GW Instek GDS-3502 Oscilloscope 500MHz 4G S/s 2CHs DSO
- 500MHz Bandwidth, 2 Input Channels
- 4GSa/s Real-time Sampling Rate(half channels); 100GSa/s Real-time Sampling Rate(all channels)
- Per Channel 200Mpts Memory Depth
- 200,000 wfm/s of Waveform Update Rate
- 10.2 inch 800*480 TFT LCD Display
- 490,000 Segmented Memory and Waveform Search Functions to Optimize the Efficiency of Record Length
- 38 Automatic Measurement Functions Offers Various Measurement Selections
- High resolution acquisition mode
- I2C/UART/CAN/LIN Serial bus trigger and decoding functions
- Dual Channel Spectrum analyzer (DC~2.5GHz) with spectrogram
- Dual Channel 25MHz Arbitrary Waveform Generator
- Optional 13 sets power analysis measurement
- Optional 16 digital channel with Logic analyzer(MSO)