top of page
GW Instek PEL-5000G DC Electronic Load 4kW - 6kW 4U up to 1200V PEL 5004G - 150 - 400 Front view
GW Instek PEL-5000G series single-channel electronic load provides 150V/ 600V/ 1200V models with a power range of 4kW~6kW. PEL-5000G has a total of 9 models featuring different combinations of power, voltage, and current. It can test and verify the specifications of batteries, electric vehicle chargers/charging stations and electric vehicle batteries. PEL-5000G supports parallel connection for same voltage specification and different power models. PEL-5000G can support up to 8 units connected in parallel to provide a maximum power of 48kW.
 
For the scenario of Battery Charger testing, PEL-5000G specifically provides four battery discharge modes, namely CV+Current Limit test mode, CV+Power Limit test mode,  CC mode and CP mode. Users can choose a suitable test mode according to the test requirements.
 
For Battery Discharge Function, users can set the discharge cut-off voltage, discharge time, or discharge capacity (Ah) in CC or CP mode to meet the battery testing requirements.
 
In order to meet the verification requirements of different DUTs, PEL-5000G provides a variety of test functions, Surge current test mode, automated OCP, OPP test functions and 150 sets of parameter storage function. The 1200V model of PEL-5000G not only provides full power output at 1000V, but also provides 60% power output at 1200V output, which is higher than the 50% power output of other manufacturers of similar electronic loads.
 
High-voltage batteries or chargers directly connected to the electronic load may cause damage to the electronic load. PEL-5000G has a built-in slow starter, which not only protects the DC load, but also saves the user's installation cost and setting time for measurement on 600V/1200V models.
 
150V
  • PEL-5004G-150-400 (150V,400A,4kW)
  • PEL-5005G-150-500 (150V,500A,5kW)
  • PEL-5006G-150-600 (150V,600A,6kW)
600V
  • PEL-5004G-600-280 (600V,280A,4kW)
  • PEL-5005G-600-350 (600V,350A,5kW)
  • PEL-5006G-600-420 (600V,420A,6kW)
1200V
  • PEL-5004G-1200-160 (1200V,160A,4kW)
  • PEL-5005G-1200-200 (1200V,200A,5kW)
  • PEL-5006G-1200-240 (1200V,240A,6kW)
 

GW Instek PEL-5000G DC Electronic Load 4kW - 6kW 4U up to 1200V

Quantity

  • Specifications/Features

    • 5 digital V / A / W Meter can be displayed on Large LCD display
    simultaneously.
    • Flexible CC, CR, CV, CP, CV + CL, CV + PL, Dynamic and short circuit operation
    modes.
    • Not only CC, CR, and CP mode have parallel operation functions, but CV
    mode also has parallel operation functions.
    • Surge Test mode for Capacitive load for current rising transient test.
    • Voltage meter display can be configured as polarity positive（”＋”）or
    negative (“－”）.
    • Master-slave control is up to 1 Master and 7 Slaves.
    • Optional Interface: GPIB, RS232, USB, LAN.
    • SEQ Load Mode's programmable function allows for ultra-high-speed step
    changes from 0.02 to 999000 ms in CC or CP mode.
    • Provide battery BMS protection test function.
    • Optional 9923 load current waveform generator to provide the battery actual
    discharge current waveform simulation.
    • Built-in test modes include Battery Discharge, BMS, Short circuit, OCP, OPP
    test modes.
    • Turbo mode can withstand up to 1.5 times the current and power electronic
    load within 2 sec. period, most fit BMS,

  • Ordering Information

    Please allow 8 - 10 weeks for this product to arrive. 

    This product comes with a 2 year warranty from the manufacturer.

  • Included Equipment & Optional Accessories

    This product includes:

     

    • SLS10B RED; PLUG CONN 20A RED T × 1
    • SLS10B BLK; PLUG CONN 20A BLK T × 1
    • PTV1-12；PIN TRML × 4
    • HD-DSUB 15pin MALE to MALE 150cm × 1
    • RND SCREW M4x0.7+S+P L=20mm × 4
    • Hexagon head M8*1.25 L=25mm NI × 2
    • K-NUT M4X0.7 NI × 4
    • NUT M8X1.25 NI × 2
    • WASHER INSIDE DIA-8.5 OUTSIDE × 4
    • SPRING WASHER INSIDE φ8 × 2
    • PEL-5004G,PEL-5005G,PEL5006G handles ： PEL-028 × 1
    • Rack Mount Kit For PEL5004G,PEL-5005G,PEL-5006G ： PEL-031 × 1

     

    Optional accessories:

     

    • PEL-030                GPIB+RS232 interface
    • PEL-023                RS232 interface
    • PEL-032 9923+RS232 interface
    • PEL-022 GPIB interface
    • PEL-025 USB interface + USB driver
    • (The driver can be downloaded）
    • PEL-024 LAN interface + LAN driver
    • (The driver can be downloaded）
    • GTL-250 GPIB Cable, 1m GPIB cable
    • GTL-248 GPIB Cable, 2m GPIB cable
    • GTL-246 USB Cable, 1.2m             USB cable

Related Products

bottom of page