The pressure test pump LR-Cal LPP 1000 is used to generate pressure for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.

If the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the test pump, the same pressure is applied to the two measuring instruments when the pressure test pump LR-Cal LPP 1000 is operated. By comparing the two measure valuses at random pressure values, the accuracy can be verified or the instrument under test can be adjusted.

Despite its compact dimensions, the pressure test pump LR-Cal LPP 1000 is easy to operate and allows for exact generation of the required test pressures The LR-Cal LPP 1000 is fitted with a fine adjustment valve for a precise adjustment of pressures.

The reference instrument is screwd directly on the top of the pump and the unit under test is connected by means of the connection tube incorporating an adapter 1/4" BSP female thread (freely rotating), contained in the scope of delivery.

Standard scope of delivery:

  • Pressure test pump LR-Cal LPP 1000
    with reference instrument pressure port 1/2" BSP female (freely rotating), with integr. O-ring (no tools needed to replace reference instrument), on the top of the pump
    with test item pressure port 1/4" BSP female (freely rotating), with integr. O-ring (no tools needed to replace test item) at the test hose of the pump
  • High-pressure Test hose 1 m
  • Manual

 

This item comes with a one year warranty from the manufacturer. Please allow 3-4 weeks lead time for this new product to arrive. 

LR-Cal LPP 1000 Hydraulic Pressure Hand Pump 1000 bar (14500 PSI)

$1,539.00Price
  • Pressure generation: 0 to 1,000 bar = 0 to 14,500 psi
    Pressure ports
    (standard version):
    For reference instrument (on the top of the pump):
    1/2" BSP female (freely rotating), with integr. O-ring
    For test item (at the test hose):
    1/4" BSP female (freely rotating), with integr. O-ring
    Materials: Aluminium, brass, ABS, Plexiglas, NBR
    Priming pressure: Hand lever
    High pressure: Switch-over knob, reduced lever stroke
    Pressure fine adjustment: Fine volume adjuster (with large volume)
    Operating media: Mineral oil based hydraulic fluid or destilled water, like used for flat irons (e.g. from local super market)
    Fluid reservoir: Volume > 200 cm³, can be filled during stroking
    Dimensions: approx. 270 x 160 x 120 mm (without test hose)
    Weight: approx. 1.3 kg (without test hose)