top of page

The MS series is suitable for pre-processing analog signals.
The plug-in units of filters, differential amplifiers, isolation amplifiers, etc. can be installed into their frames.

 

Model
MS-521
MS-523 *2
MS-525
No. of amplifier and filter unitsMaximum of 4 channelsMaximum of 8 channelsMaximum of 16 channels
Power supplyAC100
(120, 200, 220 or 240V is available.)
DC11 to 15V, or AC100VAC100, 120, 200, 220, 240V
Control or GPIB unitNot applicableApplicable by P-42AApplicable by P-42A
Dimensions119.5(W) x 199(H) x 400(D)283.5(W) x 199(H) x 450(D)480(W) x 199(H) x 400(D)
Weight *15.0kg6.1kg12.2kg

 

  • Filter: P-81 / P-82 / P-83 / P-84 / P-85 / P-86 / P-87 (see filter section)
  • Differential Amplifier: P-61
Input typeBalanced differential input
Input impedance100M ohm
Gain1 to 1000, 1-2-5 steps
Gain accuracy±0.2% at 400Hz (no load, 25°C)
Non-linearity±0.02% or better (DC, no load)
CMRR120dB or greater (at DC to 120Hz)
DC offset±2µV / °C (input-referred value)
Frequency response±0.1dB (at DC to 10kHz)
+0.5 to -3dB (at DC to 100kHz)

 

  • Isolation Amplifier

 

ModelP-62AP-64A
Isolation voltage±1000V DC continuous,
±1500Vrms
(1 minute, 48 to 62Hz)
±1000V DC continuous,
±2000Vrms
(1 minute, 48 to 62Hz)
IMRR150dB or more (DC to 60Hz)
Gain0.1 to 1000, 1-2-5 sequence
Input typeSingle-ended
Input impedance1M ohm // 50pF1M ohm // 60pF
Frequency responseDC to 100kHz (-3dB)DC to 1MHz (+1dB, -3dB)
Filter---Lowpass :
100kHz, 1kHz, 10kHz
Highpass :
10kHz, 1kHz, 100kHz
Output voltage±10V

 

  • GPIB Unit: GPIB function SH1, AH1, T6, L4, SR1, RL2, PP0, DC1, DT1, C0

                            Other function: Multiplexer output, Status monitor

 

  • Main Frame: The MS-521/523/525 is the mainframe unit with built-in power supply used to house the MS-500 series plug-in units.

NF Corp MS-500 Series Measurement System 4CH/8CH/16CH

  • Please allow 2 - 3 weeks lead time for this new product to arrive.

    Comes with a 1 year warranty from the manufacturer.

  • 24dB/oct Filter · 48dB/oct Filter   P-81 / P-82 / P-83 / P-84 / P-85

    • P-81: 0.1Hz to 1.6kHz, 24dB/oct
    • P-82: 1Hz to 16kHz, 24dB/oct
    • P-83: 0.1Hz to 1.6kHz, 48dB/oct
    • P-84: 1Hz to 16kHz, 48dB/oct

    48dB/oct Filter   P-85

    • 0.1Hz to 119.9kHz, 48dB/oct

    135dB/oct Filter   P-86 / P-87

    • P-86 : 1Hz to 119kHz, 135dB/oct (8-pole Elliptic)
    • P-87 : 1Hz to 20kHz, 135dB/oct (8-pole Elliptic)
bottom of page