top of page
Anritsu MG362x1A RF/Microwave Signal Generator 9 kHz - 70 GHz Front vie
Signal purity determines quality of measurements in several applications such as radar, transceiver, ADC/DAC and components testing. Rubidium™ pushes the envelope in phase noise performance with its low and ultra low phase noise options. Coupled with best-in-class harmonic and spurious performance, Rubidium signal generator offers industry leading overall signal purity performance that enables customers to make more accurate measurements.
 
Rubidium MG362x1A offers atomic clock frequency stability with an internal rubidium frequency reference option. Alternatively, customers can also get exceptional frequency stability by calibrating an internal oven controlled crystal oscillator (OCXO) reference with an external GNSS/GPS signal. The exceptional frequency stability makes Rubidium an ideal signal generator for Metrology and high speed clock applications.
 
Rubidium’s AM, FM/PM, Pulse and Pulse train modulation capabilities enable generation of wide range of complex analog modulated signals. Simultaneous modulation of FM/Pulse is possible to generate complex modulation waveforms such as chirps. Wide range of signal simulation capabilities are built into the signal generators for pulsed radar testing, as well.
Rubidium features a 7 inch touch screen along with keypad and dial on the front panel. Four USB 3.0 ports on the front panel enable connecting to a variety of devices such as memory devices and Anritsu's USB power sensors. Standard drivers such as IVI.NET and IVI-C along with support of SCPI commands make remote programming of Rubidium quick and efficient.

Anritsu MG362x1A RF/Microwave Signal Generator 9 kHz - 70 GHz

Quantity

  • Features

    Very low phase noise, close in and far out:

    • Make true ENOB measurements of high resolution, Gbit ADC/DACs
    • Use as LO source with low noise contribution for frequency up/down conversion in testing of Pulsed radars receivers and Communication transceivers
    • Use as high frequency clock source with very low jitter

    Atomic clock frequency stability and accuracy

    • Use as frequency reference: With option 66 output frequency accuracy of signal generator is traceable to that from a national standard lab reference in real time
    • Use as frequency accurate and stable LO in up/down conversion applications
    • Use as highly accurate and stable clock source
    • Negligible frequency aging

    Onsite level and frequency calibration

    • Calibrate level and frequency as often as necessary to ensure needed accuracy
    • Better instrument availability as there is no need to send the signal generator to external labs
    • Efficient and convenient

    Very low harmonic and spurious

    • Enhance accuracy of nonlinear measurements such as P1 dB, IP2 and IP3 for amplifiers and mixers
    • Enhance accuracy of SFDR and THD measurements for ADC/DACs
    • No filtering needed to reduce harmonics/spurious when used as clock source

    Quad pulse signal generation and pulse sweep

     

    • Simulate various types of targets in testing pulsed radars
      • Moving targets
      • Multiple targets
      • Ground reflection

  • Specifications

    Parameter Specification
    Frequency Range 9 kHz to 20/43.5 GHz/70 GHz Operable up to 72 GHz
    Frequency Resolution 0.001 Hz
    Phase Offset Adjustable in 0.1 degree steps
    SSB phase noise -136 dBc/Hz (typ) and -140 dBc/Hz (measured) @ 10 GHz output, 10 kHz offset
    Internal time base stability - Aging < ±2 x 10E-8 per year with Option 3
    < ±1 x 10E-9 per year with Option 56
    Reference frequency input/output 10 MHz, 100 MHz and 1.6 GHz
    Output power -130 dBm to +20 dBm (MG36221A standard output, with Option 2)
    -130 dBm to +16 dBm (MG36241A, standard output, with Option 2)
    -90 dBm to +6 dBm (MG36271A, standard output, with Option 2)
    Level accuracy and flatness ± 1.4 dB (MG36221A/MG36241A)
    ± 2.5 dB (MG36271A)
    Harmonics (20/43.5/70 GHz) -58 dBc (MG36221A)
    -55 dBc (MG36241A and MG36271A)
    Sub Harmonics -83 dBc (MG36221A and MG36241A)
    -63 dBc (MG36271A)
    Non-harmonics (20/43.5/70 GHz) -63 dBc
    Modulation AM, FM, PM, Pulse and Pulse Train
    Pulse modulation: min pulse width <50 ns (unleveled)
    Pulse modulation: Rise/Fall times 5 ns (typical)
    LF signal Generator waveforms Sine, square, pulse, triangle, ramp, GN/UN noise
    Frequency sweep modes Step, List, Analog (MG36221A and MG36241A only)
    Frequency sweep width 9 kHz to full frequency range (step, list)
    100 MHz to full frequency range (analog)
    Power sweep Step, List, and Analog
    Power sweep resolution 0.01 dB/step

  • Options

    Option Description
    MG362x1A-0001 Rack Mount with Slides (Cannot be ordered with Option 11)
    MG362x1A-0002 Mechanical Step Attenuator, 110 dB (MG36221A/MG36241A)
    Mechanical Step Attenuator, 90 dB (MG36271A)
    MG362x1A-0003 Low Phase Noise and High Stability (Required for Option 13)
    MG36221A-0006 Analog Sweep, Frequency
    MG36241A-0006 Analog Sweep, Frequency
    MG362x1A-0009 Rear Panel K(m) Connector RF Output (for MG36221A and MG36241A)
    MG362x1A-0010 User Defined Modulation (Requires Option 12, Option 26, and Option 27 when ordering without Option 15.
    Requires Option 12, Option 27, and Option 45 when ordering with Option 15.)
    MG362x1A-0011 Rack Mount without Slides (Shelf Mount)
    MG362x1A-0012 Amplitude, Frequency and Phase Modulation, Internal/External (Requires Option 27 )
    MG362x1A-0013 Ultra Low Phase Noise (Requires Option 3)
    MG362x1A-0015 High Power Output (Cannot be ordered with Option 26
    Choose Option 45 when ordering with Option 26)
    MG362x1A-0016 Analog Power Sweep
    MG362x1A-0017 Delete Front Panel (Requires Option 1 or 11
    Cannot be ordered with Option 29)
    MG362x1A-0018 On-site User Level Calibration (Requires 2000-2166-R accessory kit and MA243x0A USB Power Sensor, sold separately)
    MG362x1A-0023 Premium Phase Noise, CW (Requires Options 3 and 13) (Available on model MG36221A only)
    MG362x1A-0025 Pulse Train Modulation (Always Requires Option 27. Also requires Option 26, or When ordered with Option 15, requires Option 45)
    MG362x1A-0026 Pulse Modulation, Internal/External ( Always requires Option 27. When ordered with Option 15, choose Option 45 instead of Option 26)
    MG362x1A-0027 Modulation Hardware (Requires at least one of Option 12 and/or Option 26, or Option 45)
    MG362x1A-0029 Front Panel Modulation Input/Output Access (Always requires Option 27. Requires either Option 12 and/or Option 26. When ordered with Option 15 requires Option 45 and/or Option 12. Cannot order with Option 17)
    MG362x1A-0030 600 ohms External AM/FM Input Impedance (Requires Option 12 and 27)
    MG362x1A-0033 Phase Noise, Export Option (Cannot be ordered with Options 3, 13, 23 or 56 for MG36221A. Cannot be ordered with Options 3, 13, or 56 for MG36241A or MG36271A. )
    MG362x1A-0037 Removable SDIO Memory
    MG362x1A-0045 High Power Pulse Modulation ( Requires Option 27, Cannot be Ordered with Option 15 or Option 17)
    MG362x1A-0056 Ultra Stability Time Base (Requires Option 3 or 13)
    MG362x1A-0066 GNSS Atomic Clock Receiver (Requires option 3 or 13)
    MG362x1A-0082 K(f) Connector
    MG36241A-0082 K(f) Connector
    MG362x1A-0097 Accredited Calibration to ISO17025 and ANSI/NCSL Z540-1, includes calibration certificate, test report, and uncertainty data
    MG362x1A-0098 Standard Calibration to ISO17025 and ANSI/NCSL Z540-1, includes calibration certificate
    MG362x1A-0099 Premium Calibration to ISO17025 and ANSI/NCSL Z540-1, includes calibration certificate, test report, and uncertainty data

  • Adapters

    Model Number Description
    1091-26-R SMA(m) to N(m), DC to 18 GHz, 50 Ω
    1091-27-R SMA(f) to N(m), DC to 18 GHz, 50 Ω
    1091-80-R SMA(m) to N(f), DC to 18 GHz, 50 Ω
    1091-81-R SMA(f) to N(f), DC to 18 GHz, 50 Ω
    34NK50 Precision Adapter, N(m) to K(m), DC to 18 GHz, 50 Ω
    34NKF50 Precision Adapter, N(m) to K(m), DC to 18 GHz, 50 Ω
    34NKF50 Precision Adapter, N(m) to K(f), DC to 18 GHz, 50 Ω
    34NFK50 Precision Adapter, N(f) to K(m), DC to 18 GHz, 50 Ω
    34NFKF50 Precision Adapter, N(f) to K(f), DC to 18 GHz, 50 Ω
    K220B Precision Adapter, K(m) to K(m), DC to 40 GHz, 50 Ω
    K222B Precision Adapter, K(f) to K(f), DC to 40 GHz, 50 Ω
    K224B Precision Adapter, K(m) to K(f), DC to 40 GHz, 50 Ω
    33KK50C Calibration Grade Adapter, K(m) to K(m), DC to 43.5 GHz, 50 Ω
    33KKF50C Calibration Grade Adapter, K(m) to K(f), DC to 43.5 GHz, 50 Ω
    33KFKF50C Calibration Grade Adapter, K(f) to K(f), DC to 43.5 GHz, 50 Ω
    34VFK50A Precision Adapter, V(f) to K(m), DC to 43.5 GHz, 50 Ω
    34VFKF50A Precision Adapter, V(f) to K(f), DC to 43.5 GHz, 50 Ω
    34VK50A Precision Adapter, V(m) to K(m), DC to 43.5 GHz, 50 Ω
    34VKF50A Precision Adapter, V(m) to K(f), DC to 43.5 GHz, 50 Ω

  • Test Port Cables, Phase Stable

    N120-6 RF Cables, Semi-Rigid, N(m) to N(m), 1 each, 0.01 to 18 GHz, 50 Ω, 15 cm (5.9 in)
    NS120MF-6 RF Cables, Semi-Rigid, N(f) to N(f), 1 each, 0.01 to 18 GHz, 50 Ω, 15 cm (5.9 in)
    15NNF50-1.0B Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(f) to N(m), 50 Ω
    15NNF50-1.5B Test Port Cable, Flexible, Phase Stable, 1.5 m (59”), DC to 18 GHz, N(f) to N(m), 50 Ω
    15NN50-1.0B Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(m) to N(m), 50 Ω
    15LLF50-1.0A Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, 3.5 mm(m) to 3.5 mm(f), 50 Ω
    15KKF50-1.0A Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, K(m) to K(f), 50 Ω
    3671KFS50-60 Test Port Cable, Flexible, Phase Stable, DC to 26.5 GHz, K(f) to 3.5 mm(m), 63.5 cm, 50 Ω
    3671KFK50-60 Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 63.5 cm (25 in), 50 Ω
    3671KFKF50-60 Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(f), 63.5 cm (25 in), 50 Ω
    3671KFK50-100 Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 1 m (38 in), 50 Ω
    806-206-R Flexible Phase Stable Cable, DC to 70 GHz, 24 in (61 cm), V(m) – V(f), 50Ω
    806-209-R Flexible Phase Stable Cable, DC to 70 GHz, 36 in (91.5 cm), V(m) – V(f), 50Ω
    806-304-R Flexible Phase Stable Cable, DC to 40 GHz, 36 in (91.5 cm), K(m) – K(f), 50Ω
    806-396-R Flexible Low Loss Phase Stable Cable, DC to 70 GHz, 36 in (91.5 cm), V(m)-V(f), 50Ω

  • Phase-Stable 18/40/43.5 GHz Armored Cables

    3670N50-1 Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(f), 50 Ω
    3670N50-2 Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(f), 50 Ω
    3670NN50-1 Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(m), 50 Ω
    3670NN50-2 Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(m), 50 Ω
    3670K50A-1 Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω
    3670K50A-2 Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω

  • Accessories

    Model Number Description
    01-200 Calibrated Torque End Wrench, GPC-7 and Type N
    01-201 Torque End Wrench, 5/16 in, 0.9 N.m (8 lbf·in) (for tightening male devices, for SMA, 3.5 mm, 2.4 mm, K, and V connectors)
    01-203 Torque End Wrench, 13/16 in, 0.9 N.m (8 lbf·in) (for tightening ruggedized SMA, 2.4 mm, K and V test port connectors)
    01-204 End Wrench, 5/16 in, Universal, Circular, Open-ended (for SMA, 3.5 mm, 2.4 mm, K, and V connectors)

Related Products

bottom of page