Universal clamp-meter / multimeter.
The CMP-2000 is ruggedly constructed, and egonomically designed for technicians and engineers to use comfortably for long periods.
A variety of functions are all at your fingertips in a hand-held device.
Measures current up to 2,000 A; the large jaw is 2.4 ins diameter, and it can clamp around bus bars 2.75 x 0.7 ins.
Safety First!
CAT IV 600 V measurement category.
The instrument has an electronic overload protection of all functions and ranges.
Features:
- AC current measurement (TRUE RMS) up to 1,500 Amps and DC up to 2,000 Amps.
- Measurement of INRUSH current for start-up of electrical motors or equipment.
- AC voltage measurement (TRUE RMS) up to 750 VAC and DC up to 1,000 VDC.
- Resistance measurement for resistances below 30 Ω
- Continuity test with audio.
- Capacitance measurement.
- Temperature measurement (Fahrenheit or Celsius).
- Frequency measurement.
- Duty cycle measurement.
- Diode test.
Sonel CMP-2000 Clamp Meter Digital Clamp-On Multimeter 2000A
Ordering Information
Please allow 4-5 weeks for this product to arrive.
This product comes with a 2 year manufacturer warranty.
Technical Specifications
Please see datasheet for full specifications.
AC current measurement (TRUE RMS) up to 1,500 A and DC up to 2,000 A.
Measurement of INRUSH current in start-up phase of electrical device.
AC voltage measurement (TRUE RMS) up to 750 V and DC up to 1,000 V.
Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 30 Ω.
Capacitance measurement
Temperature measurement (Fahrenheit or Celsius).
Frequency measurement.
Duty cycle measurement.
Diode test.
Additionally:
- safe, insulated measuring clamp,
- autoranging,
- „DATA HOLD” function, for holding measured values,
- backlit LCD,
- „DC ZERO” mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored „zero” value,
- „MAX/MIN” function,
- over range indication,
- „AUTO-OFF” function after 30 min.
Electric security:
- measurement category: CAT IV 600 V acc. to EN 61010 - 1,
- protection class acc. to EN 60529: IP20,
Other technical data:
- power supply, 9 V battery type 6LR61,
- display: 6,600 counts, backlit LCD,
- continuity test: threshold 30 Ω,
- diode test: test current of 0.8 mA , typical open circuit voltage 3.2 V DC, typical,
- low battery indication: BAT displayed,
- over range indication: ‘OL’ displayed,
- temperature sensor: type K thermocouple,
- input impedance: ca.10 MΩ (V DC and V AC),
- AC bandwidth: 50 to 500 Hz,
- auto power OFF: 30 minutes,
- dimensions: 11" x 4.25" x 2.09" / 281 x 108 x 53 mm,
- weight: 1.26 lbs / 570 g (with battery),
- accordance with following standards: EN 61010 - 1, EN 61010 - 2-032.
Rated operational conditions:
- able to open the clamp: Ø 2.25" / 57 mm wire; 2.75" x 0.7" / 70 x 18 mm bus bar,
- operating temperature: 32F to 122F / 0 to +50 °C,
- storage temperature: -4F to 140F / -20 to +60 °C,
- operating altitude: max 6,562 ft / 2,000 m.
Included Equipment
-Set of Test Leads
-K Type Probes
