Sonel CMP-3000 belongs to the new generation of clamp meters. It combines innovation, durability and high-tech solutions.
Why is it so special? Thanks to its equipment and capabilities. The standard flexible current probe (Rogowski coil) with a diameter of up to 160 mm provide easy and safe measurements of AC current up to 3000 A, significantly improving the performance of tests on busbars or industrial switchgears. The current probe connects to the meter with a 170 cm long test lead. This makes the CMP-3000 able to work away from live parts.
The user can keep a greater distance and control the meter with the Sonel Multimeter Mobile application. It provides communication with the meter via Bluetooth. With its help, you can use the CMP-3000 as a recorder, and in addition, observe parameters, save results, create reports or remotely control special functions - e.g. INRUSH current measurement.
The meter's hard clamp has been designed to facilitate testing in hard-to-reach and tight places. In the characteristic protrusion on the top of the jaws there is a non-contac voltage indicator - just bring it near the wire and watch if the LED diode informing about voltage detection lights up.
In response to the needs of our users, the device has provided a number of facilities. The CMP-3000 has been equipped with a flashlight illuminating the measurement place, as well as a rubber casing increasing grip reliability and mechanical strength. The professionalism of the set is emphasized by the unique carrying case that holds the meter and its equipment.
Sonel CMP-3000 Clamp-On Multimeter 3000A Resolution .01A
Ordering Information
Please allow 4-5 weeks for this product to arrive.
This product comes with a 2 year manufacturer warranty.
Technical Specifications
Please see datasheet for full specifications.
Operating data
-
measurement category according to IEC 61010-1: CAT IV 600 V (III 1000 V)
-
type of insulation: double, Class II
-
housing type: double-composite
-
degree of housing protection acc. to EN 60529: IP40
-
pollution degree: 2
-
opening of measurement clamp: 48 mm (1.9”)
-
power supply of the meter: 6LR61 9 V battery
-
diode test: I = 0.3 mA, U0 < 2.8 V DC
-
continuity test: acoustic signal for R < 50 Ω, measuring current <0.5 mA
-
indication for range exceeding: OL symbol
-
low battery indication: symbol
-
measurement rate: 2 measurements per second
-
INRUSH function:
- sampling time: 37.5 Hz (RMS), 2.4576 MHz (clock)
- integration time: 106 ms -
crest factor for 50/60 Hz and indications in the range of 5…100%
- range of 40 A and 400 A: 3.0
- range of 1000 A: 1.4 -
range of the non-contact voltage detector: 10…1000 V AC (50/60 Hz)
-
response time for PEAK function: 1 ms
-
temperature sensor: type K thermocouple
-
input impedance: 10 MΩ (V AC/DC)
-
AC read-out: True RMS (A AC and V AC)
-
AC bandwidth: 50…1000 Hz
-
LCD display: 5 digit LCD with backlit
-
50.000 counts with function indicators
-
dimensions: 230 x 76 x 40 mm
-
flexible probe dimensions: 140 x 180 mm
-
meter weight: 501 g
-
meter weight (without batteries): 456 g
-
operating temperature: +5..+40°C
-
operating humidity: < 80%
-
storage temperature: -20..+60°C
-
storage humidity: < 80%
-
maximum operating altitude: 2000 m
-
Auto-Off function: approx. 30 min
-
compliance with the requirements of the following standards: EN 61010-1, EN 61010-2-032, EN 61010-2-033, EN 61326
-
quality standard: ISO 9001
Bluetooth specification
- Version: v4.0+EDR
- Frequency range: 2400 MHz…2483.5 MHz (ISM band)
- Guard band: 2 MHz < f < 3.5 MHz
- Modulation method: GFSK, 1 Mbps, 0.5 gauss
- Receiving signal range: -82…-20 dBm
- Transmission power minimum: -18…+4 dBm
-
Included Equipment
-F-16 Flexible Clamp
-9V Battery
-Set of CAT IV Test Leads
-Carrying Case
-K Type Temperature Probe
-K Type Adapter
-User Manual
-Certificate of Calibration
