top of page
AFJ LT32C/10 LISN Artificial Mains Network 3 Phase 32A
LT32C/10 is a four-line LISN, (50mH + 5 Ohm) // 50 Ohm, in line to CISPR 16-1-2 requirements in the 9kHz to 30MHz frequency range.

It is based on air-core inductors and contains artificial hand as well as a PE simulating network, that could be bypassed. It includes built-in pulse limiter and 10dB attenuator and can also be used in DC applications.

LT32C/10 has a remote switching line which can be automatically controlled by FFT3000 receivers. TTL control inputs are available to enable integration with other devices.

Because of the standard design of CISPR 16-1-2 V-networks, LT32C/10 should be connected to either a low-impedance protective earth system or to an isolating transformer.

LT32C/10 includes switching operations measurement (power meter) according to CISPR 14-1, up to 32A.

AFJ LT32C/10 LISN Artificial Mains Network 3 Phase 32A

  • Please contact us for a quote or more information about this product. 
    info@stratatek.com or (905) 406 - 0100

  • Electrical properties:

    • Frequency range: 9kHz ÷ 30MHz
    • Rated voltage: 230V AC / 150V DC – 450V AC / 300V DC
    • Impedance: (50mH+5W) // 50W
    • Number of Phases: 3+N
    • Tolerance: <20%
    • Rated Current load: 4 x 32A
    • Max. permitted frequency DC ÷ 63Hz supplies
    • Built-in pulse limiter and attenuator 10dB

    Terminals:

    • Output impedance: 50W
    • Connector: BNC female
    • Artificial Hand: 220pF + 510W
    • Artificial PE: 50mH // 50W
    • Interface: DB15 M/F for AFJ equipment
bottom of page