Berkeley BNC Model 7000 Series Phase Noise Tester/Signal Source Analyzer 40GHz

Frequency Range	7070: 1 MHz to 7 GHz 7300: 1 MHz to 26 GHz 7340: 1 MHz to 40 GHz
Input Power Range	-10 to +20 dBm
Analysis Range (Offset)	0.01 Hz to 100 MHz
Dimensions (W x L x H) Weight	18.4 x 13.5 x 6.1 in   [467.5 x 342 x 154 mm] 22lbs [10 kg]
Measurements Supported	CW and Pulse Absolute Phase Noise (Standard, Ultra-Low Noise, High-Drift mode) CW and Pulse Additive Phase Noise, CW and Pulse Amplitude Noise, FFT (Fast Fourier Transform) and Transient Analyzer, Time Stabiltily and Spectrum Analysis, Frequency Counter,  Allan Deviation, Jitter, Power and Phase, VCO Characterization Test Bench and Baseband Measurements.

Applications

• High-speed production testing of phase noise
• VCO Testing and Characterization
• Additive Phase Noise characterization of amplifiers, transmitters, mixers 
• Ultra-low Phase Noise oscillator analysis
• DRO's, SAW, YIG, VCO, PLL, Synthesizers, etc. 
• Time Stability analysis of clocks

Features

• All-in-one compact very fast measurement system
• Measurements down to -190 dBc/Hz
• Wide offset range from 0.01 Hz to 100 MHz
• Highest flexibility & dynamic range by selectable internal or external references
• Two extremely flexible integrated programmable low noise power supplies and VCO tuning voltages.
• Powerful GUI and programming interface
• External battery pack option

OPTIONS

OPTION CODE	MODE	DESCRIPTION
GUI	ATE
AM	Y	Y	AM Noise Measurement and Analysis
LN	Y	Y	Ultra-Low Noise Internal OSC (improves Close-in or low offsets measurement floor)
PULSE	Y	N	Pulse Measurement Mode (Absolute and Additive Phase Noise)
NPS	Y	N	Narrow Pulse and Low Duty Cycle Measurement Mode (Absolute Phase Noise) *NEW
BURST	Y	N	Burst Mode Phase Noise Measurement (great for measuring very low duty RF pulse)
APN	Y	N	Additive (residual) Phase Noise Measurement and Analysis
LO	Y	N	Access to two Internal References
GPIB	Y	Y	GPIB interface port
TRAN	Y	N	Transient Measurement
TSTAB	Y	N	Time Stability Measurement and Analysis
VCO	Y	Y	Voltage Controlled Oscillator (VCO) Characterization Bench
SPEC	Y	N*	Spectral Monitoring
RM	n/a	n/a	Rackmountable Chassis (* No carrying Handle and no protective rubber bezel)

ACCESSORIES

Model or Part Number	Description
P/N 7141	Traceable AM / PM Noise Standard
PS06	1GHz to 6GHz Mechanical Phase Shifter
PS18	4GHz to 18GHz Mechanical Phase Shifter
P/N 7128	Windows-based Laptop with BNC Model 7000 Series GUI configured
P/N 7135	Spare Power Supply

A remote control for the instrument is available with LAN (VXI-11), USB or GPIB. The GPIB is an option and conforms with IEEE standards. The remote control is addressed with a user choice of software or command string options. The included comprehensive GUI gives users control of all parameters in BNC's familiar virtual instrument panel.