The A200-1 set consists of a sensor, which allows for oscilloscopically displaying analog signals under EFT/ESD/RF interference potential free. Disturbed signals can be easily detected. In the device under test the sensor transforms the measured analog signals into optical signals. The optical signals are transmitted via a fibre optical cable to the optical receiver which transforms them into electrical signals. These can be seen with an oscilloscope or can be used for controlling other devices. The system is suitable for monitoring a device under test in an anechoic chamber or for EMC optimizing of hard- and software.
A200-1 Set consists of:
- 1xAE 200, Optical Receiver
- 1xAS 200, Optical Sensor (50 / 10) V DC
- 1xLWL Ø 2.2 mm 1.5 m, Optical Fibre Single 1.5 m
- 1xNT FRI EU, Power Supply Unit
- 1xA200-1 acc, Accessories
- 1xA200-1 case, System Case
- 1xAnalog m, User Manual
Langer EMV A200-1 Set Optical Fibre Probe 1-channel, 500 kHz
A200-1 Set User Manual
Order Info
Please allow 2-3 weeks lead time for this new product to arrive.
Specs
Bandwidth DC ... 500 kHz Sampling rate 3 Msps Resolution 12 Bit AE 200 Optical Receiver Bandwidth DC ... 500 kHz Voltage range - output 0 V ... 10 V Optical input: Optical fiber Ø 2.2 mm Supply voltage 12 V ... 16 V Current input ≈ 100 mA AS 200 Optical Sensor Bandwidth DC ... 500 kHz Measuring range 0 V ... 50 V / 0 V ... 10 V DC (switchable) Input resistance 100 kΩ Radiated immunity > 100 V/m Supply voltage 3 V ... 16 V Current input ≈ 30 mA Optical fibre length 1 m ... 20 m
