The A300-1 set consists of a sensor, which allows for oscilloscopically displaying analog signals under EFT/ESD/RF interference potential free. Disturbed signals can be easily detected. In the device under test the sensor transforms the measured analog signals into optical signals. The optical signals are transmitted via a fibre optical cable to the optical receiver which transforms them into electrical signals. These can be presented with an oscilloscope or can be used for controlling other devices. The system is suitable for monitoring a device under test in an anechoic chamber or for EMC optimizing of hard-and software. For signal detecting within the device under test several sensor types AS300 or AS350 with different measuring ranges are available.
A300-1 Set consists of:
- 1xAE 300, Optical Receiver
- 1xAS 300, Optical Sensor, Analog ± 10 V DC
- 1xLWL Ø 2.2 mm 1.5 m, Optical Fibre Single 1.5 m
- 1xNT FRI EU, Power Supply Unit
- 1xA300-1 acc, Accessories
- 1xA300-1 case, System Case
- 1xAnalog m, User Manual
Langer EMV A300-1 Set Optical Fibre Probe 1-channel, 5 MHz
A300-1 Set User Manual
Order Info
Please allow 2-3 weeks lead time for this new product to arrive.
Specs
Bandwidth DC ... 5 MHz Sampling rate 12.5 Msps Resolution 10 Bit AE 300 Optical Receiver Bandwidth DC ... 5 MHz Voltage range - output ±1 V Optical input: Optical fiber Ø 2.2 mm Supply voltage 12 V ... 16 V Current input ≈ 90 mA AS 300 Optical Sensor Bandwidth DC ... 5 MHz Sampling rate 12.5 Msps Measuring range ± 10 V Input resistance 100 kΩ Radiated immunity > 200 V/m Supply voltage 4.5 V ... 16 V Current input 70 mA (4.5 V)
30 mA (16 V)Optical fibre length 1 ... 20 m
