LanXPLORER Pro is a tester for analysing and diagnosing problems in networks, cabling and Ethernet devices using copper, fibre and Wi-Fi interfaces.

PoE/PoE+ load tests to determine the maximum power available
PoE/PoE+ monitor that shows the voltage and current used at the device
Optical power indication to test your fibre optic cabling
VLAN automatic detection of VLAN ID
Wi-Fi monitor – signal strength (dBm) and Signal to Noise ratio (SNR)
Wiremap testing for open, shorts, miswires and split pairs
Distance to fault for copper data cabling
VoIP monitor – measure QoS in real time using the in-line mode
Network congestion – identify the top 10 talkers and listeners
Traffic stats – monitor Min/Max/AVG throughput in MB/s
NETMAP – list all IP and MAC addresses on the network
Network Discovery – display crucial network information using LLDP/CDP/EDP
TREND AnyWARE™ mobile app – share PDF reports with colleagues and clients

Trend Networks LANXPLORER PRO Diagnose Network Problems on Copper/Fiber/Wi-Fi

US$4,409.00

Quantity

Ordering Information
Please allow 1-2 weeks for this product to arrive.

This product comes with a 12 month (One Year) warranty from the manufacturer.
Included Equipment
- LanXPLORER Pro – In-line Network Troubleshooter
- 1 x LanXPLORER Pro test unit
- 1 x remote unit
- 1 x 2.4/5GHz Wi-Fi antenna
- 1 x TREND amplifier probe 62-164
- 1 x RJ45 insert extraction tool plus
- 10 x RJ45 inserts
- 1 x power module (rechargeable)
- 1 x mains PSU/charger
- 2 x 30cm RJ45 cable
- 1 x USB Wi-Fi adapter
- 1 x carrying case.
Technical Specifications
Basic Specifications

Max. No. of Jobs - 30
Max. No. of Stored Test - 7500
Max. Length - 150m
Battery Life - 5 hours
Dimensions per handset in mm - 205 x 98 x 45
Weight per handset - 0.475 kg
Features
- Touchscreen
- Custom wiremap
- Display network configuration – IPv4 / IPv6 compatible
- Wiremap for miswires, split pairs, opens and shorts
- Distance to opens and shorts (TDR)
- PoE/PoE+ detection and load test
- Tone generator for cable tracing
- Ping and Traceroute testing
- Hub blink for port identification
- DHCP client
- Switch speed detection – 10/100/1000 Mb/s
- User-exchangeable RJ45 inserts
- Support for up to 12 wiremap remotes
- Backlit colour screen
- Autotest button performs a suite of network tests
- Network Probe provides detailed port and network information of each device
- Port identification using EDP/CDP/LLDP protocols
- VLAN detection
- Traffic utilisation bar graph
- Generate test reports (PDF or CSV). Send test reports from your mobile device using the free TREND AnyWARE App
- Fibre optic cable interface
- Logon using the 802.1x protocol
- Optical interface with power indication
- Loopback mode for transmission testing
LanXPLORER Pro

All features of the NaviTEK NT Pro as well as the following:
- Monitor PoE power consumption in-line
- NETMAP list all networks devices
- NETVERIFY compare two NETMAP scans to identity changes on the network
- In-line mode for Ethernet device troubleshooting (copper)
- VoIP QoS and signal testing
- Wi-Fi interface to access network
- Wi-Fi site survey @2.4/5GHz 802.11a/b/g/n/ac
- Top 10 bandwidth talkers and listenersDiscover IP address conflicts
- Traffic statistics – network and devices
- Touch screen
Applications
- Identify sources of network congestion
- Identify new, missing or rogue network devices
- Troubleshoot PoE devices
- Determine cause of VoIP quality issues
- Locate Wi-Fi deadspots
- Determine whether source of network connectivity issue is the LAN or PC/Network device
- Cable installation testing – i.e. wiremap/length
- Cable troubleshooting – i.e. TDR/distance to faultNetwork verification testing – following installation, moves, additions and changes to LAN/Internet
- Port profiling – check ID and services provided at each port of a switch
- Network auditing – i.e. document devices connected to LAN
Voice over IP (VoIP) – Monitor Quality of Service (QoS) in real time using In-Line Mode.Quality of Service (QoS) is measured in real time when LanXPLORER Pro is connected in-line between a VoIP phone using SIP (Session Initiation Protocol) and the network. QoS metrics include jitter, delay, total packets, packet loss, source/destination IP addresses and port number. With standard SIP, signalling processes are shown including call pick up, phone number of both phones and duration.

Wi-Fi Testing – Resolve issues on your Wi-Fi network and reduce downtimeAs well as using the Wi-Fi interface (2.4/5GHz 802.11a/b/g/n/ac) to connect and troubleshoot the network, the LanXPLORER Pro can perform a Wi-Fi site survey that displays the access point ID, signal strength, channel and encryption status. Quickly identify causes of slow Wi-Fi networks or connection issues, such as overlapping Wi-Fi channels or wrong SSID setup. Identify top wireless bandwidth consumers and total aggregate bandwidth consumption (overloaded access point) when connecting the LanXPLORER Pro between wireless access point and the network.

Ethernet Device Diagnostics and Troubleshooting using In-line Mode (Copper)The in-line feature allows monitoring of network traffic between any two devices on the network to diagnose Ethernet issues that cannot be detected by software tools running on a PC or managed switch.

Top 10 Talkers and Listeners

Identifies top 10 bandwidth consuming devices (both transmitting and receiving) on the network to help troubleshooting, e.g. connect between core switch and the internet router to monitor total incoming and outgoing internet bandwidth consumption and identify top 10 bandwidth consuming devices.

Traffic Statistics

Monitor Min/Max/AVG throughput in Mb/s, packet count, frame size and Ethernet protocols.

VLAN Detection

Automatic detection of VLAN ID’s.

Network Diagnostic and Troubleshooting using End-Point Mode (Copper, fibre and Wi-Fi)The end-point feature is used to monitor and examine the LAN when connected directly to a network port
or a mirrored port.NETMAP/NETVERIFYThis function performs a scan of your entire network to identify all active devices by IP address, MAC address and host name which can be saved and compared to future NETMAPs to identify new or removed network devices, or changes in network configuration.Network ConflictsIdentifies source of network conflicts such as unintentionally adding DHCP servers or devices using duplicate IP addresses.Network Discovery

Connect to active network ports or Ethernet devices to verify network status and connectivity.
- Displays port ID of LLDP/CDP enabled switches to eliminate manual cable tracing
- Check Ethernet connectivity at device location to 10/100/1000 Mb/s
- Verify network configuration (device IP/gateway address/subnet mask)
- Identify IP address/name of router and number of hops between network points with traceroute test
- Troubleshoot devices by connecting directly to the Ethernet port to test operation, speed and duplex settings of the device
- Ping local network devices such as DNS, gateway/router, file servers, network printers, wireless access points, etc. Test internet connectivity by pinging website URL’s, e.g. www.google.com to verify min, max and average response time