The BS 06DB-s magnetic field source is used to generate magnetic EFT/burst fields. An EFT/burst generator (IEC 61000-4-4) supplies the field source with an EFT/burst current via an RF cable. The field source generates high magnetic fields (approx. 200 mT) in very small spaces (2.54 mm²). It is thus ideal for coupling the field into ICs. The field source can be inserted into a scanner or can be guided by hand. It has a SMB output. The connection cable for the magnetic field source is available with an SHV connector (HV SHV-SMB 1m) or with a Fischer connector (HV FI-SMB 1m; a S103A023 Fischer connector). Please specify which cable/connector when placing your order.
Scope of delivery:
- 1xBS 06DB-s, EFT/Burst IC Magnetic Field Source
- 1xHV SHV-SMB 1 m, High-Voltage Cable, SHV SMB
- 1xH4-IC case, System Case
- 1xH4-IC m, H4-IC Set User Manual
Langer EMV H4-IC Probe Set EFT/Burst Magnetic Field Source
Order Info
Please allow 2 - 3 weeks lead time for this new product to arrive.
Made and manufactured in Germany.
Comes with a One Year warranty from the manufacturer.
Technical Parameters
BS 06DB-s EFT/Burst IC Magnetic Field Source Frequency range 0...66 MHz Resolution 2.54 mm² Generated magnetic flux density 2.37 mT/A Probe head dimensions Ø 1.8 mm Max. generated magnetic flux density 200 mT Connector - output SMB, female, jack HV SHV-SMB High-Voltage Cable, SHV SMB
The "HV SHV-SMB 1m" high-voltage cable is a coaxial cable with an impedance of 50 Ohm. Specially developed by Langer EMV-Technik, it is designed with an SHV and a special SMB connector. The high-voltage cable is highly flexible and therefore especially suitable for connecting hand-guided field sources (set H3, EFT/burst IC magnetic field source) to various generators.
BS 06DB-s
The BS 06DB-s magnetic field source is supplied by an EFT/burst generator (IEC 61000-4-4) via an HV cable and is used to generate a magnetic EFT/burst field which emerges vertically from the tip of the field source in a bundle. The BS 06DB-s can be used for IC tests in combination with the ICS 105 IC scanner or can be guided by hand.
The field source is usually aligned so that the field-line bundle penetrates the area of the IC housing and thus the die in the orthogonal direction. This ensures the highest induction effect in the loops of the die (approx. 30 V/mm²). In practice, however, the interference field is usually parallel to the die surface and thus does not penetrate the die (see EFT/burst field source probe set user manual).
Technical parameters
Frequency range 0…66 MHz Resolution 2.54 mm² Probe head dimensions Ø 1.8 mm Generated magnetic flux density 2.37 mT / A Shape IEC 61000-4-4 Max. generated magnetic flux density 200 mT Connector - output SMB, female, jack Weight 15 g Sizes (L x W x H) (140 x 8 x 8) mm
