top of page

The P503 probe set is used for conducted measurements of immunity according to IEC 62132-4. The gained knowledge of immunity parameters allows the IC optimization as well as the definition of the application requirements.

 

**Please note this set requires Langer ICE1 Test Set** 

Link to ICE1: https://www.stratatek.com/product-page/langer-emv-ice1-set-ic-test-environment 

 

Scope of delivery

  • 1xP503, DPI Coupling Network up to 1 GHz, 50 V
  • 1xProbeControl-500, ProbeControl-500 Software / CD-ROM
  • 1xSMA-SMA 1 m, SMA-SMA Measuring Cable
  • 2xSMA-SMB 1 m, SMA-SMB Measuring Cable
  • 1xNT FRI EU, Power Supply Unit
  • 1xP500 case, System Case
  • 1xP500 m, P500 Set User Manual

Langer EMV P503 Probe Set RF Power Injection acc. IEC 62132-4

Quantity
  • Order Info

    Please allow 2 - 3 weeks lead time for this new product to arrive.

    Made and manufactured in Germany.

    Comes with a One Year warranty from the manufacturer.

  • P503 DPI Coupling Network up to 1 GHz, 50 V

    The P503 DPI coupling network is designed for RF direct power injection (DPI) in IC pins according to IEC 62132-4. Current and voltage can be measured seperately during the power injection via integrated measuring outputs. The P503 coupling network is connected to a power amplifier.

    Technical parameters

    Coupling capacity 3 µF
    Voltage probe without preamplifier
    Frequency range 16 kHz ... 3 GHz
    Measurement output 50 Ω, SMB
    Transfer factor -40 dB
    Ammeter /current probe with preamplifier
    -1 dB compression point 120 dBµV
    Frequency range 200 kHz ... 1 GHz
    IP3 134 dBµV
    Correction curve R (2MHz - 1 GHz), typical 0 dBΩ ( = 1 V/A)
    Correction curve R (200 kHz - 2 MHz) [dBΩ] characteristic curve
    Measurement output 50 Ω, SMB
    Noise figure 4.5 dB
    Delay from current to voltage, typical 240 ps
    Supply voltage 12 V/DC
    Max. forward power 30 W
    Max. input voltage RF 50 Veff
    Max. input current RF 1 A
    Connector - input 50 Ω, SMA
  • ProbeControl-500 ProbeControl-500 Software / CD-RO

    The software ProbeControl-500 controls the measuring station for the coupling of RF power into ICs. The coupling takes place via the device arrangement HF generator, power amplifier and directional coupler.

    Scope of delivery

    • 1xDongle, Licence Dongle

    Technical parameters

    Operating system Windows 7 64-bit
    Monitor resolution 1280 x 1024
    Interface USB
    HD space 100 MB
    Periphery CD drive
    Processor Intel Core i3
    Memory 1 GB

Related Products

bottom of page